We bring marine AC and refrigeration diagnostics to your boat throughout Tampa Bay. Instead of hauling out or guessing at expensive parts, get the airflow, seawater circuit, controls, electrical supply and cooling performance checked where the system actually operates.
Serving St. Pete, Clearwater, Tampa and all of Tampa Bay
Every service comes with our white-glove project management — one point of contact, detailed estimates, and quality-checked work.
Contact us for a free, no-obligation estimate. We'll assess your needs and provide a detailed quote before any work begins.
White-glove project management included with every service
A warm cabin can turn an overnight trip, charter day or weekend at the dock into a miserable experience. Mobile Marina comes to the marina or private dock so the system can be tested with the boat's own intake, pump, plumbing, electrical supply and controls in operation. You avoid arranging a haul-out for problems that can be diagnosed and repaired in the water, and you get a clear service path before major components are replaced.
Warm air or a fault code does not automatically mean the compressor has failed. Restricted seawater flow, a fouled strainer, a pump problem, blocked airflow, a control fault or an electrical issue can create similar symptoms. Our process starts with the full system and the pattern of failure. If several units fault together, the shared intake, pump and cooling-water path deserve attention before anyone condemns several separate compressors.
On a Tampa Bay boat with a Webasto system, three of four AC units were showing E1 faults while cooling-water flow was weak. The inspection found heavy growth in the strainers and buildup in the lines. Descaling restored reliable flow, avoiding the mistake of treating three displays as three unrelated compressor failures. That job is now documented in our Marine AC E1 Error case study so owners can see how the diagnosis unfolded.
Cabin comfort is only part of the cooling system on a boat. We also troubleshoot marine refrigerators, freezers, cold plates and refrigerated bait systems that will not start, cycle correctly or hold temperature. The repair begins with the actual equipment, its power supply and installation—not assumptions based on a household appliance.
Complete your Mobile Marina account with the boat, marina or waterfront address, slip or dock access, and installed equipment details. Add the AC or refrigeration make and model when it is available, along with the current symptoms and any fault code exactly as displayed. Our team can use the saved vessel information to prepare for service, so you do not have to repeat the same boat and access details every time something needs attention.
Dockside service is available throughout St. Petersburg, Tampa, Clearwater and surrounding Tampa Bay waterfront communities when the boat and dock can be accessed safely. Marina rules, vessel access and the repair scope can affect whether a job can be completed in place. Submit the location through your account and our team will confirm the right service plan.
If your problem is listed here, we've fixed it before — many times. If it's not listed, contact us anyway. We've probably seen it.
Weak airflow, poor seawater flow, a control problem or a refrigerant-side fault can all reduce cooling. Testing separates the symptom from the cause.
A fouled strainer, blocked intake, lost pump prime, failing pump or restricted line can reduce the water flow needed to carry heat away.
Multiple units failing together can point to a shared seawater circuit, pump, power source or control condition instead of several independent failures.
Restricted airflow and other operating problems can cause icing or performance that gets worse as the system runs. The coil should be allowed to thaw before testing.
Code meanings vary by manufacturer and control. Record the exact code and equipment model rather than repeatedly resetting the display.
A new hum, rattle, cycling pattern or loss of normal operating sound can help isolate a starting, flow, fan or electrical problem.
Condensate drainage, hoses, pans and seawater plumbing all need to be distinguished before the source of a leak is repaired.
Power, controls, ventilation, seals and the cooling system can each affect performance. Diagnosis starts with how the installed unit is behaving on the boat.
Don't wait for a small problem to become a big one. Contact us today and our technicians will diagnose and fix it right.
For dockside diagnostic work and non-routine repairs, here's exactly how the process works — so there are no surprises from the start.
We come to your dock and diagnose the issue. There is a $175 diagnosis fee — if you approve the work, it is credited toward your final invoice. If you decide not to move forward, the visit is billed on its own and you keep the diagnosis in writing.
Based on the diagnosis, we build a written estimate and send it to you for approval through our platform. We will have a strong idea of what needs to be done — but the full picture often only becomes clear once we start taking things apart.
Once your estimate is approved and the parts arrive in-house, we schedule your job. For special-order items, we require a 50% deposit up front.
If the fix is what we anticipated, we complete the work on this visit. If we uncover something else contributing to the problem, we order the additional or replacement parts, revise the estimate, keep you updated, and schedule a second visit as quickly as possible.
When a second visit is required, we complete the service and test everything to confirm the issue is fully resolved.
When the job is done, we reconcile parts and labor to the actual amounts and send your final invoice — along with photos for your records — through our platform. Pay by ACH with no fee, or by credit card with a 3.5% processing fee.
Credited toward your invoice when you approve the work. If you pass, it is billed on its own and you keep the written diagnosis.
When a job requires special-order parts, we collect a 50% deposit up front before the work is scheduled.
Pay through our platform by ACH with no fee, or by credit card with a 3.5% processing fee. Both are always available.
Mobile Marina management customers get exclusive discounts on maintenance and fuel, plus proactive inspections that catch problems before they become expensive.
Per gallon on every delivery
On all maintenance services
Monthly inspections catch issues
Complete timeline in the app
Common questions about our marine ac repair & refrigeration services
Customer case studies showing how we diagnose and resolve issues like the ones on this page.
Contact us today for a free estimate. Our team is ready to help — dockside service available throughout Tampa Bay.